Role-Based Access To Web-Hmi Features; Figure 4: Location Of For Entering User Credentials In Web-Hmi - ABB Eagle Programming Manual

The user credentials can be entered by clicking on the user icon seen on the top right-
hand corner of the Web-HMI dashboard. This opens up a dialog box where the desired
user credentials can be entered.

Figure 4: Location of for entering user credentials in Web-HMI

For further information on changing/resetting the passwords refer to section 7.4 and 7.5.

3.1. Role-Based Access to Web-HMI features

The access to various features of the device depends on the user credentials used for the
login. The Viewer has only viewing rights with very little control options and "Admin" has
the maximum control on configuring and controlling the device.
The following table shows the access rights based on login credentials.
Table 1 Table of access rights to different part of Web-HMI
Page
Dashboard
It is Strongly Advised to change the SSID & passwords for various roles
before the device is put into service to avoid unauthorized access to the
recloser settings.
After logging with "Admin", "Operator" or "Engineer" role, if the device
detects no activity over the Wi-Fi for more than 20 mins, then the Web
HMI automatically moves to "Viewer" mode.
Sub Page / Item
close button
Admin Engineer Operator
Yes Yes
Viewer
Yes No
9