Basic functions
Warning indication
Warning
Logic error
Warning
SMT logic error
Warning
GOOSE input error
ACT error
Warning
GOOSE Rx. error
Warning
AFL error
Warning
SMV config error
Warning
Comm. channel down
Warning
Unack card comp.
For further information on warning indications, see the operation manual.
3.3
Programmable LEDs
3.3.1
Function block
Figure 12: Function block
3.3.2
Functionality
The programmable LEDs reside on the right side of the LHMI.
44
Warning
Additional information
code
28
Too many connections in the configuration.
29
Error in the SMT connections.
30
Error in the GOOSE connections.
31
Error in the ACT connections.
32
Error in the GOOSE message receiving.
33
Analog channel configuration error.
34
Error in the SMV configuration.
35
Redundant Ethernet (HSR/PRP) communication in-
terrupted.
40
A new composition has not been acknowl-
edged/accepted.
1MRS758407 C
SMU615
Technical Manual