ABB RELION SMU615 Technical Manual page 127

1MRS758407 C
Output signals
Table 159: SCHLCCH1 output signals
Parameter
CH1LIV
LNK1LIV
Table 160: SCHLCCH2 output signals
Parameter
CH2LIV
LNK2LIV
Table 161: SCHLCCH3 output signals
Parameter
CH3LIV
LNK3LIV
3.15.2.4 Settings
Port mode settings
Table 162: Port mode settings
Parameter Values (Range)
Port 1 Mode
Off
On
Table continues on the next page
SMU615
Technical Manual
Values Unit Step
(Range)
True
False
Up
Down
Values Unit Step
(Range)
True
False
Up
Down
Values Unit Step
(Range)
True
False
Up
Down
Unit Step Default
On
Defaul Description
t
Status of Ethernet channel X1/LAN.
Value is "True" if the port is receiv-
ing Ethernet frames. Valid only when
Redundant mode is set to "None"
or port is not one of the redundant
ports (LAN A or LAN B).
Link status of Ethernet port X1/LAN.
Defaul Description
t
Status of Ethernet channel X2/LAN.
Value is "True" if the port is receiv-
ing Ethernet frames. Valid only when
Redundant mode is set to "None"
or port is not one of the redundant
ports (LAN A or LAN B).
Link status of Ethernet port X2/LAN.
Defaul Description
t
Status of Ethernet channel X3/LAN.
Value is "True" if the port is receiv-
ing Ethernet frames. Valid only when
Redundant mode is set to "None"
or port is not one of the redundant
ports (LAN A or LAN B).
Link status of Ethernet port X3/LAN.
Description
Mode selection for rear port(s). If port is not used,
it can be set to "Off". Port cannot be set to "Off"
Redundant mode is "HSR" or "PRP" and port
when
is one of the redundant ports (LAN A or LAN B) or
Basic functions
127