T_Health Function Block - ABB RELION SMU615 Technical Manual

Basic functions
3.12.3.3 Signals
QTY_GOOSE_COMM Input signals
Table 57: QTY_GOOSE_COMM Input signals
Name
IN
QTY_GOOSE_COMM Output signals
Table 58: QTY_GOOSE_COMM Output signals
Name
COMMVALID
3.12.4

T_HEALTH function block

3.12.4.1 Function block
Figure 40: Function block
3.12.4.2 Functionality
The T_HEALTH function evaluates enumerated data of "Health" data attribute. This
function block can only be used with GOOSE.
The IN input can be connected to GOOSERCV_ENUM function block, which is
receiving the LD0.LLN0.Health.stVal data attribute sent by another device.
The outputs OK, WARNING and ALARM are extracted from the enumerated input value.
Only one of the outputs can be active at a time. In case the GOOSERCV_ENUM
function block does not receive the value from the sending device or it is invalid, the
default value (0) is used and the ALARM is activated in the T_HEALTH function block.
3.12.4.3 Signals
T_HEALTH Input signals
Table 59: T_HEALTH Input signals
Name
IN1
78
Type Default
Any 0
Type
BOOLEAN
Type Default
Any 0
1MRS758407 C
Description
Input signal
Description
Output signal
Description
Input signal
SMU615
Technical Manual