Enabling warping and blending
Use edge blending to combine several projected images into one single, seamless image. Use
warping to project images on any surface shape.
1. Select MENU > Configuration > Geometry Correction.
2. Select the appropriate warp setting and select Enter.
3. Select Back.
4. Select Edge Blending.
5. Select the appropriate blend and select Enter.
6. To turn off warping or blending, from Geometry Correction and Edge Blending, select Off.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Adjusting the image
22