Adjusting Ir Control Settings; Setting 12V Trigger; Setting Audio Settings - Christie Inspire Series User Manual

Adjusting IR control settings

Choose IR control setting from top, front and HDbaseT.
1. Select Menu > Configuration > IR Control.
2. Select to turn on or off IR control from top, front and HDbaseT.
3. To confirm the selection, press ENTER.

Setting 12V trigger

When enabled, the projector screen is automatically raised or lowered when the projector is turned
on or off. This function only works when the projector is connected to an electrical projector screen.
1. Select Menu > Configuration > 12V Trigger.
2. Select to turn on or off 12V trigger.
3. To confirm the selection, press ENTER.

Setting audio settings

Control audio settings.
1. Select Menu > Configuration > Audio Settings.
2. Select to audio mute and adjust the volume.
3. To confirm the selection, press ENTER.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Configuring system settings
46