Table of Contents
Advertisement
9.
Connect the power and data cables.
10. Install the fan cage.
11. Install the air baffle.
12. Install the access panel.
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
The installation is complete.
Installing a front 8SFF SAS/SATA drive cage in box 2
Procedure
1.
Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack .
4.
Remove the access panel.
5.
Remove the air baffle.
6.
Remove the fan cage.
7.
Remove the bay blank.
Hardware options installation
97
Advertisement
Table of Contents
