Table of Contents
Advertisement
corrupted for any reason. This feature protects the existing ROM version, even if you experience a power
failure while flashing the ROM.
Keeping the system current
Updating firmware or system ROM
To update firmware or system ROM, use one of the following methods:
•
The Firmware Update option in the System Utilities.
•
The fwupdate command in the Embedded UEFI Shell.
•
Service Pack for ProLiant (SPP)
•
HPE online flash components
•
Moonshot Component Pack
Service Pack for ProLiant
SPP is a systems software and firmware solution delivered as a single ISO file download. This solution uses
SUM as the deployment tool and is tested and supports HPE ProLiant, HPE BladeSystem, HPE Synergy, and
HPE Apollo servers and infrastructure.
SPP, along with SUM and iSUT, provides Smart Update system maintenance tools that systematically update
HPE ProLiant, HPE BladeSystem, HPE Synergy, and HPE Apollo servers and infrastructure.
SPP can be used in an online mode on a server running Windows, Linux, or VMware vSphere ESXi, or in an
offline mode where the server is booted to an operating system included in the ISO file.
The preferred method for downloading an SPP is using the SPP Custom Download at https://www.hpe.com/
servers/spp/custom.
The SPP is also available for download from the SPP download page at https://www.hpe.com/servers/spp/
download.
Smart Update Manager
SUM is an innovative tool for maintaining and updating the firmware, drivers, and system software of HPE
ProLiant, HPE BladeSystem, HPE Synergy, and HPE Apollo servers, infrastructure, and associated options.
SUM identifies associated nodes you can update at the same time to avoid interdependency issues.
Key features of SUM include:
•
Discovery engine that finds installed versions of hardware, firmware, and software on nodes.
•
SUM deploys updates in the correct order and ensures that all dependencies are met before deploying an
update.
•
Interdependency checking.
•
Automatic and step-by-step Localhost Guided Update process.
•
Web browser-based user interface.
•
Ability to create custom baselines and ISOs.
•
Support for iLO Repository (Gen10 iLO 5 nodes only).
•
Simultaneous firmware and software deployment for multiple remote nodes.
176
Software and configuration utilities
Advertisement
Table of Contents
