Renaming Buttons; Working With Preset Chains - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Renaming buttons

C
AMERA PAGE
You can rename presets, custom scenes, and other user-defined settings to identify them. This also
helps you identify and avoid overwriting them when you store new ones.
Right-click the button for your setting, and edit the label.

Working with preset chains

C
AMERA PAGE
Preset chains automate the process of moving through a series of shots. If you know people will want to
move the camera through the same set of shots routinely, program a preset chain.
Things to know about preset chains:
Each chain can have up to 12 waypoints; each of these can be an existing preset or a shot that you
n
set up as you create the chain.
You can set the chain to run once, or to run as a continuous loop.
n
Individual waypoints can be reordered or deleted.
n
Custom waypoints can be recalled to view the shot, and changed as needed.
n
n Each waypoint allows you to specify a delay after movement.
n Preset chains may be set to run in a continuous loop, or just once.
Preset chains can be stopped while running.
n
Complete Manual for the RoboSHOT 30E-M PTZ Camera
17