Setting The Direction For Camera Movements - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Setting the direction for camera movements

C
AMERA PAGE
The camera's default references for left, right, up, and down may not suit your situation.
By default,the arrow buttons on the remote and in the web interface show the direction you would see the
camera move if you were looking the same direction as the camera.
If the presenter will control the camera with the remote:
1. Select Settings to open the direction control box.
2. Set Pan Direction to Inverted to make the camera move to the presenter's left when they press the left
arrow button.
If controlling the camera with a joystick:
1. Select Settings to open the direction control box.
2. Set Tilt Direction to Inverted to make the camera tilt down when you push the joystick forward.
Note
Inverting tilt direction is only for joystick control. For ceiling-mounted cameras, use the Image Flip setting
to invert the video and make the arrow controls on the remote and in the web interface match the actual
tilt direction.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
26