Camera Preset - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

camera preset

Moves the camera to the specified preset, or stores the current camera position and optionally CCU
information, either with or without specifying that Tri-Synchronous Motion is to be used when moving to
this position.
Synopsis camera preset { recall | store} [1 - 16] [tri-sync <1 - 24>] [save-ccu]
Options recall [1 - 16]
store [1 - 16]
tri-sync [1 - 24]
save-ccu
>camera preset recall 3
Examples
OK
>
Moves the camera to preset 3.
>camera preset store 1
OK
>
Saves the camera's current position as preset 1.
>camera preset store 4 tri-sync 15
OK
>
Stores the camera's current position as preset 4. The camera will use Tri-
Synchronous Motion at speed 15 when it is recalled to this preset.
>camera preset store 2 tri-sync 10 save-ccu
OK
>
Stores the camera's current position as preset 2. The camera apply the current
CCU settings and use Tri-Synchronous Motion at speed 15 when it is recalled to
this preset.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
40
Moves the camera to the specified preset,
using Tri-Synchronous Motion. if this was
saved with the preset. If CCU information was
saved with the preset, the camera switches to
the CCU setting associated with the preset.
Stores the current camera position as the
specified preset.
Optional: Specifies that the camera uses Tri-
Synchronous Motion to move to this position,
using the specified speed.
Optional: Saves the current CCU (color and
lighting) settings as part of the preset. If not
specified, the last color settings are used
when recalled.