Configuring streaming behavior
Conferencing applications use USB streaming. After initial device set-up is complete, the camera's USB
stream is always enabled.
Note
The screen shots in this section are representative, but may differ from what you see.
Viewing the USB stream
Do one of these things:
Start or join a conference.
n
Open a stream viewer and select the camera as the video capture device.
n
The image below shows how to view a camera's USB stream using VLC Media Player. The media player
will correctly identify your camera by model.
Configuring USB streaming
S
TREAMING PAGE
These settings affect how the camera works with soft conferencing applications.
Device Name – Specify how the camera shows up in your soft client's camera selection list.
Enable UVC Extensions – Allow conferencing applications to control the camera.
Depending on the conferencing application that you use, you may also need to change the USB stream
format setting. See
Setting other camera
Complete Manual for the RoboSHOT 30E-M PTZ Camera
behaviors.
27