Maintenance And Troubleshooting Commands; Streaming Settings Get - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Maintenance and troubleshooting commands

The following commands are available for maintenance and troubleshooting:

streaming settings get

n
network settings get
n
network ping
n
system reboot
n
n system factory-reset
n version
streaming settings get
Returns current IP and USB streaming settings.
Synopsis streaming settings get
USB Active
Parameters
USB Device
USB Frame_Rate
USB Resolution
USB Version
UVC Extensions_Enabled
>streaming settings get
Example
USB Active
USB Device
USB Frame_Rate
USB Resolution
USB Version
UVC Extensions_Enabled false
OK
>
Complete Manual for the RoboSHOT 30E-M PTZ Camera
true
RoboSHOT 30E-M
30
720p
3
46
True if a USB stream is present; false if not.
The USB Device Name currently assigned.
Frame rate for the USB stream (negotiated
with conferencing client). 0 when no USB
stream is present.
Resolution of the USB stream (negotiated
with conferencing client). 0x0 when no USB
stream is present.
2 or 3, as negotiated with the conferencing
client. 0 if no USB stream is present.
Allow or disable far-end control of the
camera.