Installing A Firmware Update - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Installing a firmware update

S , F
YSTEM PAGE IRMWARE TAB
By default, the camera is set to update automatically via Windows. For this to happen, the camera must
remain connected to the Microsoft Teams Rooms collaboration computer.
You also have the option of updating manually.
The latest firmware and release notes are available on the product's web page at www.legrandav.com.
The release notes provided with each update can help you to decide whether to install the update.
Caution
Be sure the camera stays connected to power and to the network during the update. Interrupting the
update could make it unusable.
To update the firmware manually:
1. Read the release notes and download the firmware update file.
2. Select the firmware update file that you downloaded. The filename ends with .p7m.
3. Select Begin Firmware Update.
4. Read and understand the information in the Confirm dialog box, then select Continue. A progress
message box opens and the status light on the front of the camera turns yellow. If the update process
presents warnings or error messages, read them carefully.
The camera reboots to complete the update, and the web interface prompts you to log in again.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
30