Command Line Interface Shell (Clish) Reference; Requirements; Usage Notes; Getting More Information - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Command Line Interface SHell (CLISH) reference

The Vaddio Command Line Interface SHell (CLISH) allows an external device such as an AMX or
Crestron presentation system to control the camera. It is also used for writing macros.

Requirements

SSH (recommended) or Telnet must be enabled on the Security page of the device's web interface.
n
Your computer must have a suitable SSH or Telnet client. If using Telnet, port 23 is used.
n
n Your computer must be able to connect to the device over the network.
n When you start a CLISH session, you must log in using the admin account.

Usage notes

The > character is the command prompt.
n
In addition to the camera control commands, session management commands are available – help,
n
history, and exit.
n CTRL-5 clears the current serial buffer on the device.

Getting more information

Use a question mark as a command or command parameter to display a list of available commands,
subcommands, or command parameters. For example, ? returns all top-level commands; network ?
returns the valid subcommands for the network command; and network ping ? returns the
parameters available for the network ping command.
Firmware updates sometimes implement new commands or command parameters. We do not update
the manuals for every firmware update, and occasionally the author makes a mistake. Querying returns
the command parameters that are currently available, along with guidance on command syntax.

Typographical conventions

n { x | y | z } – Choose x, y, or z.
<variable> – Substitute the desired value here.
n
< x - y > – Valid range of values is x through y.
n
[parameter] – Parameter is not required.
n
Complete Manual for the RoboSHOT 30E-M PTZ Camera
34