Pre-Installation Functional Check; Installing The Wall Mount - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Pre-installation functional check

If you're installing the camera where it's hard to reach, you may want to verify functionality before you
install it.
1. Connect the camera.
2. Start a call.
3. Verify that you can select the camera, and that it sends video.
If the camera turns on and sends video, continue with the installation. If it does not, follow the applicable
Troubleshooting steps.

Installing the wall mount

The camera is shipped with a wall mount. Other mounting options are available as well. Contact us if you
don't have the camera mount you need.
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
n If you mount it to drywall, use the wall anchors provided with the wall mount.
If you mount it to a wall box, use the cover plate screws supplied with the wall box.
n
Complete Manual for the RoboSHOT 30E-M PTZ Camera
6