Basic Connections For Conferencing - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Complete Manual for the RoboSHOT 30E-M PTZ Camera
When making cables for this product, use Cat-5e or better cable. We recommend using high-quality
connectors and a high-quality crimping tool.
We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or routed near
sources of electromagnetic interference such as power lines or fluorescent light fixtures.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in
equipment damage and will void the warranty.
Pro Tip
Label all cables at both ends.

Basic connections for conferencing

This diagram shows a basic conferencing configuration.
The PoE+ switch is not required. You can connect the camera to the network and to power using the mid-
span power injector included with the camera.
5