Setting The Speeds For Manual Movements; Setting The Speeds Of Movements To Presets - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Setting the speeds for manual movements

C
AMERA PAGE
The Pan Speed, Tilt Speed, and Zoom Speed sliders control how fast the camera moves in response to
the direction and zoom controls on the IR remote and in the web interface.
To set speeds for movements using the arrow buttons:
Use the speed sliders to adjust the speed of movements that you control with the buttons for pan, tilt, and
zoom. For tight shots, slower is usually better.

Setting the speeds of movements to presets

C
AMERA PAGE
The Pan Speed, Tilt Speed, and Zoom Speed sliders in the Global Preset Non-Tri-Sync Speeds control
how fast the camera moves to presets saved without Tri-Synchronous Motion information.
These settings also determine the speed of movements when the camera is controlled by people at the
far end of a conference. The default speeds are high; far-end participants may be more comfortable with
lower speeds.
To set speeds for movements to presets:
In the Global Preset Non-Tri-Sync Speeds section, set the speeds for movements to presets that do not
use Tri-Synchronous Motion.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
24