System Reboot; System Factory-Reset - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

system reboot

Reboots the system either immediately or after the specified delay. Note that a reboot is required when
resetting the system to factory defaults (system factory-reset).
Synopsis system reboot [<seconds>]
Options <seconds>
Examples >system reboot
OK
>
The system is going down for reboot NOW!roboshot-30e-m-D8-80-39-62-
A7-C5
Reboots the camera immediately.
>system reboot 30
Reboots the camera in 30 seconds. The response is in the same form; the system
message appears at the end of the delay.

system factory-reset

Gets or sets the factory reset status. When the factory reset status is on, the system resets to factory
defaults on reboot.
Synopsis system factory-reset { get | on | off}
get
Options
on
off
>system factory-reset get
Examples
factory-reset (software):
factory-reset (hardware):
OK
>
Returns the factory reset status.
This evaluates the most recent system factory-reset on or off command, if
one has been received.
>system factory-reset on
factory-reset (software):
factory-reset (hardware):
OK
>
Enables factory reset upon reboot.
Note
This command does not initiate a factory reset. The factory reset takes place on
the next reboot.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
48
The number of seconds to delay the reboot.
Returns the camera's current factory reset
status.
Enables factory reset on reboot and returns he
camera's current factory reset status.
Disables factory reset on reboot and returns
he camera's current factory reset status.
off
off
on
off