Camera Pan - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

camera pan

Moves the camera horizontally.
Synopsis camera pan { left [<speed>] | right [<speed>] | stop | get | set <position> [<speed>]
[no_wait] }
Options
left
right
speed <1 - 24>
stop
set <position>
no_wait
get
>camera pan left
Examples
OK
>
Pans the camera left at the default speed.
>camera pan right 20
OK
>
Pans the camera right using a speed of 20.
>camera pan stop
OK
>
Stops the camera's horizontal motion.
>camera pan set -15
OK
>
Pans the camera to 15° left of its centerline at the default speed.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
36
Moves the camera left.
Moves the camera right.
Optional: Specifies the pan speed as an integer
(1 to 24). Default speed is 12.
Stops the camera's horizontal movement.
Sets the camera's absolute pan position in
degrees, as a floating point value between
approximately -150.00 (left) and 150.00 (right).
This is the minimum range. Individual cameras
may have slightly more travel before they reach
their physical limits.
The camera pan set command blocks
execution of subsequent commands until the
camera reaches the specified position.
Optional – allows the camera pan set
command to return the command prompt
immediately, while the requested camera
movement is still in progress.
Returns the camera's absolute pan position in
degrees, as a floating point value between
approximately -150.00 (left) and 150.00 (right).