Adjusting Color, Lighting, And Image Quality Settings - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

Adjusting color, lighting, and image quality settings

C
AMERA PAGE
When adjusting for the room lighting, start with a factory-defined CCU scene and adjust as needed. After
you customize the camera's color and lighting settings, you can save the adjustments as a custom CCU
scene.
Fine-tune the color and lighting as needed using the Color Settings controls.
n Auto Iris allows the camera to compensate automatically for the light level. Clear this box to adjust
iris and gain manually.
Backlight Compensation (available when Auto Iris is selected) reduces contrast to adjust for bright
n
light behind the main subject of the shot. This setting can't be used with Wide Dynamic Range.
Wide Dynamic Range (available when Auto Iris is selected) increases the contrast between the
n
brightest and darkest areas. This setting can't be used with Backlight Compensation.
n Auto White Balance adjusts color automatically. Clear this box to adjust red gain and blue gain
manually.
Red Gain and Blue Gain (available when Auto White Balance is not selected) provide manual color
n
adjustment.
Detail adjusts the image sharpness. If the video looks grainy or "noisy", try a lower Detail setting.
n
Chroma adjusts the color intensity.
n
Gamma adjusts the range (gray density) between bright areas and shadows.
n
The Lighting and Image Quality Quick Reference
If you make a change that you don't like, start over by selecting and then deselecting Auto White
Balance.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
and
20
Color Adjustment Quick Reference may be helpful.