Table of Contents
Advertisement
Installation
This section covers:
Tips for selecting camera locations
n
Cabling notes
n
Installing the camera mount and mounting the camera
n
System connection diagrams with cameras and audio peripherals
n
Cameras and network-connected audio peripherals must be paired to the host device after the
installation is complete.
Contact Vaddio Technical Support if you have questions or encounter any problems. Phone
800.572.2011 / +1.763.971.4400, email av.vaddio.techsupport@legrand.com.
And a required safety note here:
Note
PoE type networks connected to this equipment are for intra-building use only and should not be
connected to lines that run outside of the building in which this product is located.
Don't Void Your Warranty!
Caution
EasyIP products are for indoor use. Do not install these products outdoors or in a humid environment
without the appropriate protective enclosure.
Caution
Do not install or operate any EasyIP product if it has been dropped, damaged, or exposed to liquids. If
any of these things happen, return the product to Vaddio for safety and functional testing.
Before You Start
Work with the network administrator to plan your EasyIP deployment. A typical EasyIP system
includes network equipment that serves DHCP addresses.
Do these things before installing any Vaddio product:
Be sure you can identify all cables correctly.
n
Check Cat-5 cables for continuity.
n
n
Talk to the network administrator.
o
Inform the network administrator if you are installing the EasyIP system with a PoE+ switch. The
switch sold as part of the EasyIP ecosystem is configured for DHCP operation. The network
administrator may need to take steps to ensure a trouble-free installation.
o
If you will be responsible for configuring the devices that you install, ask what hostnames (if any)
you should assign to them.
Things to keep in mind when deciding where to install the camera:
Consider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall
n
obstructions where the camera is to be mounted.
n
Ensure that the camera will point away from the ceiling and lights. The camera will not perform well if
it is pointed toward a light source such as a light fixture or window.
Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera
3
Advertisement
Table of Contents
