Table of Contents
Advertisement
Use
19 OTHER CONFIGURATIONS - CROP
SPRAYER (CS)
19.1 EXAMPLE OF GeoSystem 5W CS INSTALLATION ON 4-SECTION
SPRAYING SYSTEMS
Make sure the system is connected
1
exactly as on Figure 5.
2
In this step, the connection of the
sensors is not important but the valve
cable connections and the GeoSystem
driver box output connection are.
3
Make sure all the switches are in the
OFF position and turn on the monitor
by pressing the
4
First message depends on
Geosystem model
5
The Firmware version and system
name are then shown.
The message "please wait" then
6
appears.
7
The operating values are shown.
8
Press the
the same time to enter the
configuration menu.
Scroll up and down the menu entries
9
using the
the "number of valves" parameter is
reached.
10
Press the
configuration.
key.
and
keys at
and
keys until
key to enter the
GeoSystem RevA5
75
-
Advertisement
Table of Contents
