Table of Contents
Advertisement
Configuration
11
Definition of the second value.
Repeat the operations in step 9.
12
Perform steps 9 and 10 until the
definition of all the calibration points to
be set (max 25).
13
Press the
calibration.
If everything is successful, the
message "Completed!" will appear.
14
SPEED SENSOR CALIBRATION
15
Press the
calibration.
The message "Counter value" will
16
appear, which will gradually increase
as the tractor moves towards the end
point.
17
Press the
gets to the end point (100 m in the EU
and 300 feet in the US) in order to
complete the calculation of the speed
constant.
18
Press the
calibration.
48
-
key to finish the
key to enter the
key when the tractor
key to go back to the
GeoSystem RevA6
Advertisement
Table of Contents
