Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 18

Configuration GeoSystem RevA6
CONTROL, SELECTION OR MODIFICATION KEYS
ON / OFF key:
Turns the monitor on / off
Foam marker activation key:
Enables / disables the foam marker outputs on the left-hand side of the
vehicle during the operating phase (active spraying)
Control key:
- Allows return to the previous menu
- Resets the percentage increase / decrease of the spraying value
- Allows the counters for the current treatment to be reset
UP key:
- Scrolls through the individual items to the previous menu
- Increases the value of the parameter
When modifying parameters, holding down the key allows the input
values to be increased quickly
DOWN key:
- Scrolls through the individual items to the next menu
- Decreases the value of the parameter
When modifying parameters, holding down the key allows the input
values to be decreased quickly
OK key:
- Confirms access to the selected menu or previously modified parameter
value
- Holding down this key for more than 2 seconds displays the values for
the stored treatments
Control key:
Enables / disables the automatic adjustment of the spraying
Foam marker activation key
Enables / disables the foam marker outputs on the right-hand side of the
vehicle during the operating phase (active spraying)
Control key:
Enables the operating parameter menu.
17
-