Table of Contents
Advertisement
Configuration
13 SYSTEM USE
13.1 OPERATING CYCLE EXECUTION
Based on the configured parameters, the monitor acquires the measurements from the
various sensors and required adjustments.
1
Turn on the monitor by pressing
2
The current dosage values appear and,
in brackets, the set values. The bottom
line shows the speed of travel of the
vehicle.
This display is available during
operation.
3
The monitor displays the individual values measured and calculated through the
13.1.1 LIST OF AVAILABLE VALUES IN THE OPERATING CYCLE
1
Current pressure
Only the following parameters are
displayed:
Value of pressure calibration ≠ 0
-
-
Pressure calculation = YES
2
Current speed
.
and
or
GeoSystem RevA6
keys.
43
-
Advertisement
Table of Contents
