Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 29

Configuration
11.3 OPERATING PARAMETER CONFIGURATION
This allows all the operating parameters for each chemical treatment to be set.
1
Turn on the monitor by pressing
2 First message depends on the
Geosystem model.
3 The Firmware version and system name
then appear.
Then, the "Please Wait" message is
4
shown.
5 The operating values are then shown.
6
Press the
program selection/configuration menu.
7
Press the
choose the type of program and confirm
by pressing the
It is possible to configure and choose up
to 10 different types of program.
28
-
key to enter the
and keys to
key.
.
GeoSystem RevA6