Table of Contents
Advertisement
Configuration
13.6 MANAGEMENT OF TREATMENTS WITH 4 SECTIONS (OS)
Below is a description of the difference between an automatic adjustment with constant
pressure or constant volume.
13.6.1 ADJUSTMENT IN CONSTANT PRESSURE MODE
During a treatment, in the event of closure of valves of different heights between left and
right, the pressure can be kept constant but the quantity of liquid per unit of area will be
re-calculated based on the number and type of nozzles activated.
Example: 200 l/ha and 4 bar of pressure
Figure 22 – Example with 4 active sections in constant pressure mode
If section 2 is closed, the pressure will be maintained constant at 4 bar but the
distribution value will be reduced to 150 l/ha
Figure 23 – Example with 3 active sections in constant pressure mode
GeoSystem RevA6
55
-
Advertisement
Table of Contents
