Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 19

Configuration
SWITCHES FOR THE CONTROL OF HYDRAULIC FUNCTIONS
Switch for controlling the main valve:
• to open the main valve, slide the switch upward (LED on)
• to close the main valve, slide the switch downward (LED off)
Switch for controlling the regulating valve:
• to increase the amount of liquid to be sprayed, position the switch
upward
manual function: increases the amount of liquid to be
sprayed
automatic function: increases the amount of liquid to be
sprayed at 10% intervals in relation to the set value
• in order to decrease the amount of liquid to be sprayed, position
the switch downward
manual function: decreases the amount of liquid to be
sprayed
automatic function: decreases the amount of liquid to be
sprayed at 10% intervals in relation to the set value.
11.2 CONFIGURATION OF GENERAL PARAMETERS
Allows the setting of parameters required for the correct operation of the monitor.
1
Turn on the monitor by pressing
2 First message depends on Geosystem
model
3 The Firmware version and system name
then appear.
18
-
.
GeoSystem RevA6