Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 33

Configuration
UP key:
- Scrolls through the individual items to the previous menu
- Increases the value of the parameter
When modifying parameters, holding down the key allows the input
values to be increased quickly
DOWN key:
- Scrolls through the individual items through to the next menu
- Decreases the value of the parameter
When modifying parameters, holding down the key allows the input
values to be decreased quickly
OK key:
- Confirms access to the selected menu or previously modified parameter
value
- Holding down this key for more than 2 seconds displays the values for
the stored treatments
Control key:
Enables / disables the automatic adjustment of the spraying
ROW key:
This is used to temporarily change the value of the width between rows.
The value is not stored; if the current job is resumed (Set key) the
original value is reset.
Control key:
Enables the operating parameter menu.
32
-
GeoSystem RevA6