Table of Contents
Advertisement
Configuration
10.6 FOAM MARKER CONNECTION - CROP SPRAYER (CS) VERSION
SX= +12 Volts when active
DX= +12 Volts when active
Figure 12 - Connection with the Foam Marker
The Geosystem cannot directly power the foam marker because its power consumption is too
high. Use an appropriate adaptor (#8394016).
10.7 FLOWMETER INSTALLATION
Figure 13 - Flowmeter Installation
The flowmeter adapter allows connection to any flowmeter that provides a 12V pulse output
proportional to the flow. The image shows adapter connections.
FOAM MARKER
SIDE SELECTION
SEE DETAIL B
FOAM MARKER
POWER SUPPLY
FLOWMETER ADAPTER
GeoSystem RevA6
15
-
Advertisement
Table of Contents
