Table of Contents
Advertisement
Configuration
8
Keep pressing the
through the subsequent programs.
It is possible to delete the current
selection by pressing the
11.3.1 LIST OF OPERATING PARAMETER MENU ITEMS
1
Dosage setting:
This sets the current value of the
quantity of liquid per unit of area (liters
per hectare).
2
Press the
parameter and set the value using the
and
For some models, if the "Distance" value
was set in the "Dosage Setting"
parameter, the value shown will have a
decimal value (if this value is less than
100).
3
Nozzle ID:
This identifies the current nozzle.
For this parameter, there are a
maximum of 20 IDs, divided into:
-ISO: 12 pre-set and
-USER: 8 customized that can be
entered by the user, entering the liters
per minute and rated pressure values for
each one.
See ISO table in section 22
key to pass
key.
key to open the
keys.
GeoSystem RevA6
29
-
Advertisement
Table of Contents
