Configuration
13.6.2 ADJUSTMENT IN CONSTANT DISTRIBUTION MODE
During a treatment, in the event of the closure of valves of different heights between left
and right, it is possible to keep the volume of liquid sprayed constant but the value of
pressure will be increased.
Example: 200 l/ha and 4 bar of pressure
Figure 24 – Example with 4 active sections in constant distribution mode
If section 2 is closed, the distribution value will be maintained but the pressure will be
increased to 6 bar.
Figure 25 – Example with 3 active sections in constant pressure mode
56
-
GeoSystem RevA6