Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 41

Configuration
data related to the position and the
speed is unreliable.
12.3 OPERATING PARAMETER CONFIGURATION
This allows all the operating parameters for each chemical treatment to be set.
1
Turn on the monitor by pressing
2 First message depends on Geosystem
model
3 The Firmware version and system name:
Orchard Sprayer then appear.
Then, the "Please Wait" message is
4
shown.
5 The operating values are then shown on
the display.
6
Press the
program selection/configuration menu.
40
-
key to enter the
.
GeoSystem RevA6