Table of Contents
Advertisement
Use
which is reset to the value set during
the configuration phase.
15.8
AUTOMATIC OPERATION
Automatic operation is indicated by the letter A on the left-hand side of the display. The
value in brackets is the dosage set by the user; GeoSystem will control the regulating
valve to keep the dosage constant as the vehicle speed varies.
15.9
MANUAL OPERATION
Manual operation is indicated by the letter M on the left-hand side of the display.
GeoSystem will record the operating data shown during the operation.
15.10
TANK REFILLING DURING A TREATMENT
1
If the field being treated requires an
greater amount of liquid than the
amount in the tank, it will be necessary
to refill the tank one or several times.
2
Each time there is a refill, the tank
level must be updated (parameter:
"Tank Level")
Select the parameter: "Tank Level"
3
4
Press the
5
Press the
the quantity of liquid put into the tank.
6
The parameter is automatically
updated with the maximum tank
capacity value (parameter: "Tank
capacity").
If the "Tank level" parameter is NOT selected, pressing the key for 5 seconds will
prepare the system for a new treatment, resetting all the counters.
7
To modify the value, enter the
modifying phase by pressing the OK
key and using the
66
-
key for 5 seconds.
key to manually set
The "Tank level" parameter is a special parameter:
and
GeoSystem RevA6
Advertisement
Table of Contents
