Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 60

Use
Latitude (LAT) and longitude (LON) of
the current position, number of
satellites used to detect the position
(SAT), degree of accuracy of the
GPS tracking (HDOP) and the type of
calculation used to detect the position
(FIX).
The FIX value can be 0 (no detected
position), 1 (position detected by
GPS) and 2 (position detected by
DGPS).
16 Press any key to return to the key
test; press the
the normal operation of the monitor.
17
To repeat the "TEST HW", switch the
monitor off and on again.
key to return to
GeoSystem RevA6
59
-