Table of Contents
Advertisement
Use
Disable the switch to stop the alarm.
6
The operating values then appear on
the display and, if necessary,
additional information such as:
• the character "M" before the
7
current distribution value
"M 125 l/ha": this indicates that
the monitor is in manual mode;
• the character "A" before the
8
current distribution value
"A 125 l/ha": this indicates that
the monitor is in automatic
mode.
• the "►" symbol in the
9
bottom left: this indicates that
the treatment is running.
• the "▌▐" symbol in the
10
bottom left: this indicates that
the treatment has been paused.
• the number "3" in the bottom
11
left: this identifies the type of
program being performed.
• the "@" symbol: this indicates
12
that the data shown on the right
has been calculated or
simulated and has not
originated from the reading of a
specific sensor. E.g. the speed
shown is a simulated value.
13
• The symbol
the upper right: this indicates
the presence of an alarm.
symbol in
GeoSystem RevA6
63
-
Advertisement
Table of Contents
