Tecomec GEOline GEOSYsTEM 240 Instruction Manual page 69

Use
• The distance traveled (Km)
• The treatment duration
(hh:mm).
• Average speed (km/h)
• Maximum speed (km/h)
15.11.2 RESETTING THE TOTALIZERS
1 The monitor stores the treatment data in a list of 20 elements.
2
Press and hold the
seconds to save the most recent data
stored on the list and reset all the
counters, preparing to record the data
related to the new treatment to be
performed.
Press the
reset or
If there is no level sensor, by pressing the reset key, all the operating data will be reset,
except the tank level, which is reset to the value set during configuration.
15.12 RETRIEVE TREATMENT DATA
1
Press the
access the menu that displays the list
of the last 20 treatments performed.
68
-
key for 5
key to confirm the
key to cancel.
key for 3 seconds to
GeoSystem RevA6