Table of Contents
Advertisement
Use
GeoSystem RevA6
Figura 27 –Orchard Sprayer Display
15.3
TREATMENT DEFINITION
The term treatment refers to the set of data recorded during a spraying activity. The
operating parameters recorded by GeoSystem are stored in a list. The treatment list can
store up to 20 treatments.
The data relating to each treatment can be viewed using the appropriate keys.
Every time a new treatment is started, the data from the current treatment is added to the
list.
Treatment number 1 is the most recent treatment saved.
Treatment number 2 is the second last treatment saved and so on.
Each time a treatment is saved, all the other treatments on the list shift one position.
When the list is full, the recording of a new treatment results in the deletion of the oldest
treatment (i.e., the one in twentieth position).
After treatment n° 20, the "Total" value appears, which refers to the historical data related
to all the treatments.
This value cannot be reset, not even through the memory RESET procedure.
61
-
Advertisement
Table of Contents
