Table of Contents
Advertisement
Use
T
ROUBLESHOOTING
▪ G
PS CANNOT FIX POSITION
Check if the GPS signal is available. Make sure that the antenna is placed in an open
space far from any walls or trees. It is also recommended to switch off the computer. All
hardware connections must be checked, especially the M12 connector. Finally repeat the
hardware test.
▪ C
HECK ANTENNA CONNECTION
If the antenna is not connected, the computer will not receive any signal and the "GPS
comm. Error" message will appear on the display.
In this case, the antenna connection may be wrong. It is recommended to switch off the
computer. All hardware connections must be checked, especially the M12 connector.
Finally repeat the hardware test.
If the fault is still present, please contact the manufacturer.
, FIX=0
GeoSystem RevA5
73
-
Advertisement
Table of Contents
