Uploading Tag Data Link Parameters - Omron NX Series User Manual

9 Tag Data Link Functions
If the operating mode of one or more CPU Units was changed to download the parameters,
you can return the CPU Units to the previous operating modes. If the No Button is clicked, the
CPU Units remain in PROGRAM mode.
4
The following dialog box is displayed to show that the download was completed.
9-2-10

Uploading Tag Data Link Parameters

You can upload tag data link parameters (such as tag set settings and connection settings) from Ether-
Net/IP devices in the EtherNet/IP network.
The following procedure shows how to upload the parameters. For details on how to connect to the
network from the Network Configurator, refer to 9-2-8 Connecting the Network Configurator to the Net-
work on page 9-48.
Precautions for Correct Use
• Make sure that the major CIP revision of the device registered with the Network Configurator
is the same as the major CIP revision of the NX-series EtherNet/IP Unit that you use. If the
major CIP revisions are not the same, the parameters may not be uploaded. To determine
whether uploading is possible, refer to 9-2-3 Registering Devices on page 9-17.
There are two ways to upload the parameters.
Uploading from All Devices in the Network
1
Connect the Network Configurator online, and then select Upload from the Network Menu.
9-54
NX-series EtherNet/IP Unit User's Manual (W627)