Omron NX Series User Manual page 387

l Connection Tab Page
• Target Node Status
Information about the target node that acts as the originator is displayed.
If all tag data link connections to the node are established and normal, this information is dis-
played in blue. However, if any connection is broken it is displayed in red.
However, this information is displayed in gray if the connection to the node is stopped.
• Connection Status
The Status Column of the connection status shows the status of each connection that is set as
the originator. The connection status can be used to identify the cause of tag data link errors.
Refer to 14-6-2 Connection Status Codes and Troubleshooting on page 14-55 for details on the
connection status.
NX-series EtherNet/IP Unit User's Manual (W627)
14 Troubleshooting
14-51
14