14 Troubleshooting
Event code
Event name
85D40000 hex
Packet Dis-
carded Due
to Full Re-
ception Buf-
fer
85D50000 hex
Link OFF
Detected
96440000 hex
Link Detect-
ed
96470000 hex
IP Address
Fixed
96480000 hex
BOOTP Cli-
ent Started
964B0000 hex
SNMP Start-
ed
96500000 hex
IP Address
Changed
96510000 hex
SNMP Set-
tings
Changed
96520000 hex
Subnet
Mask
Changed
X Bus EtherNet/IP Function Module
This section provides the list of errors (events) related to the X Bus EtherNet/IP Function Module.
14-10
Meaning
•
A packet drop occur-
Network congestion occurred.
red.
•
An Ethernet link OFF
An Ethernet cable is broken,
was detected.
disconnected, or loose.
•
The Ethernet switch's power
supply is turned OFF.
•
Communications speed mis-
matched.
•
Noise
•
The identity object was reset.
•
Settings for EtherNet/IP were
downloaded from the Network
Configurator or Sysmac Stu-
dio, or the Clear All Memory
operation was performed.
•
EtherNet/IP was restarted.
•
Establishment of an
Establishment of an Ethernet
Ethernet link was de-
link was detected.
tected.
•
The correct IP ad-
The correct IP address has
dress has been deter-
been determined and Ethernet
mined and Ethernet
communications can start.
communications can
start.
•
The BOOTP client
The BOOTP client started re-
started requesting an
questing an IP address.
IP address.
•
The SNMP agent
The SNMP agent started nor-
started normally.
mally.
•
The IP address was
The IP address was changed.
changed.
•
The SNMP settings
The SNMP settings were
were changed.
changed.
•
The subnet mask set-
The subnet mask setting was
ting was changed.
changed.
M
Assumed cause
a
j
NX-series EtherNet/IP Unit User's Manual (W627)
Level
I
M
O
Reference
P
n
i
b
rt
f
n
s
o
page
14-25
¡
page
14-26
¡
page
¡
14-27
page
14-27
¡
page
¡
14-28
page
¡
14-28
page
¡
14-29
page
¡
14-30
page
14-31
¡