Omron NX Series User Manual page 26

Precautions for Correct Use
Security Measures
• If you forget your user name or password, go online with administrator privileges and check your
user authentication settings.
If you forget the user name or password for administrator privileges, start the CPU Unit in Safe
Mode and connect the Sysmac Studio online to perform the Clear All Memory operation following If
you cannot log in in the Authentication in Safe Mode Dialog Box.
Refer to the NX-series NX502 CPU Unit Hardware User's Manual (Cat. No. W629) for how to start
the CPU Unit in Safe Mode.
• If you cannot go online with the Sysmac Studio because of forgetting the registered IP Address for
Packet Filter settings, connect from the built-in EtherNet/IP port of the CPU Unit. Refer to
Troubleshooting When You Cannot Go Online from the Sysmac Studio in the NJ/NX-series
Troubleshooting Manual (Cat. No. W503) for details.
Disposal
• When disposing of or transferring our products, information such as user data stored in the device
may be seen by third parties, resulting in information leakage. It is recommended that you erase the
data on your responsibility before disposing of or transferring the device. Omron shall not be liable
for any loss, damage, or other expenses incurred directly or indirectly in the event of any information
leakage due to disposal or transfer.
For details on complete data erasure function for completely erasing user data, refer to the NJ/NX-
series CPU Unit Software User's Manual (Cat. No. W501).
24
NX-series EtherNet/IP Unit User's Manual (W627)