Omron NX Series User Manual page 440

Appendices
4
Select the Advanced Tab in the Windows Firewall Dialog Box.
The Windows Firewall with Advanced Security Dialog Box is displayed.
5
Click Inbound Rules in the left pane and then double-click SysmacX86Server in the Inbound
Rules list for Sysmac Studio version 1.31 or higher. For Sysmac Studio lower than version
1.31, double-click Sysmac Studio.
If you double-click SysmacX86Server, the SysmacX86Server Properties Dialog Box ap-
pears. If you double-click Sysmac Studio, the Sysmac Studio Properties Dialog Box is dis-
played.
6
For Sysmac Studio version 1.31 or higher, make the following settings in the
SyamacX86Server Properties Dialog Box. If Sysmac Studio version is lower than 1.31, make
the following settings in the Syamac Studio Properties Dialog Box.
• If the Public Check Box under Profiles is not selected in the Advanced Tab Page, select it.
• If the Enabled Check Box under General is not selected in the General Tab Page, select it.
• Select Allow the connection under Action in the General Tab Page.
A-40
NX-series EtherNet/IP Unit User's Manual (W627)