Omron NX Series User Manual page 422

Appendices
9
Register devices as required.
1) Click the + Button under the Target Device List in the Toolbox.
The Add Target Device Pane is displayed.
2) Enter relevant items for the target devices to add.
Node address
Model name
Revision
3) Here, set the following items for Controller 3 and click the Add Button.
The target device is added to the Target Device List in the Toolbox.
Node address: 192.168.250.3
Model name: NX-EIP201
Revision: 2
4) You can click the Import Tag Set Button to import the tag sets that are set in the Network
Configurator to the target devices.
Select To/From File - Export to File in the Tag Sets Tab Page of the Edit Device
Parameters Dialog Box, and generate CSV files to import.
l Adding EDS Files
1
Right-click anywhere in the Target Device List in the Toolbox of the EtherNet/IP Connection
Setting Tab Page and select Display EDS Library from the menu.
2
The EDS Library Dialog Box is displayed. Click the Install Button.
A-22
Menu
Enter the target device IP address.
Select the target device model.
Select the revision of the target device.
Description
NX-series EtherNet/IP Unit User's Manual (W627)