A-3-3 Ethernet/Ip Connection Settings; Ethernet/Ip Connection Settings - Omron NX Series User Manual

Appendices
↓
3 Registering tags and tag sets
↓
4 Setting connections
↓
5 Going online from the Sysmac Studio
↓
6 Downloading EtherNet/IP connection
settings
Note Connections automatically start after
the download.
↓
7 Checking operation
Stopping and starting connections
*1. Variables with its Network Publish attribute set to Output or Input in the Global Variable Table are called
network variables.
A-3-3

EtherNet/IP Connection Settings

This section describes the screen configuration for EtherNet/IP connection settings.
Screen Transitions in the EtherNet/IP Connection Settings
• Connection Settings
Select EtherNet/IP Connection Settings from the Tools Menu.
EtherNet/IP Device List Tab Page
Double-click or right-click the
device to set and select Edit
from the menu.
Right-click the device to set
and select Monitor from the
menu.
A-8
--- Refer to Registering the Tag
and Tag Set on page A-14.
Register the network variables that are set in step 2 as
tags and tag sets.
--- Refer to Setting Connections
for the Originator Device on
page A-17.
Specify devices (i.e., target devices and originator devi-
ces) and tag sets to communicate with using the Ether-
Net/IP connections.
--- Refer to Transferring the
Connection Settings Data on
page A-28.
--- Refer to Transferring the
Connection Settings Data on
page A-28.
--- Refer to A-3-5 Checking
Communications Status with
the Sysmac Studio and Trou-
bleshooting on page A-32.
EtherNet/IP Connection Settings (Tag Set Display)
EtherNet/IP Connection Settings
(Connection Display)
EtherNet/IP Connection Monitor Tab Page
EtherNet/IP Connection Set-
tings (Tag Set Display)
EtherNet/IP Connection Set-
tings (Connection Display)
•
Main Window
•
Synchronization Window/
Transfer to Controller Dia-
log Box
•
EtherNet/IP Connection
Settings
EtherNet/IP Connection Moni-
tor Tab Page
Use the tab icons to switch
between displays.
NX-series EtherNet/IP Unit User's Manual (W627)