Omron NX Series User Manual page 424

Appendices
2
The Node Address Change Dialog Box is displayed. Enter a new IP address in New IP
address.
To apply the same change to other connections, select the Apply the change to other
connections Check Box.
3
To apply the same change to other connections, select the Apply the change to other
connections Check Box.
4
Click the OK Button.
l Changing All Target Device Information including Model Names and Revi-
sions
1
Right-click one of the connection lines and select Change Target Device from the menu.
2
The Target Device Change Dialog Box is displayed. Select a target device from New device.
Precautions for Correct Use
• Changeable target devices are limited to ones that have "OMRON" in the Vendor ID and is an
EDS device of the Communications Adapter in the Device Type.
• To display a device in the list of selectable new target devices, the device must be registered
as the target device in the Toolbox.
A-24
NX-series EtherNet/IP Unit User's Manual (W627)