Standby Function Operation; Halt Mode - NEC mPD78F0730 Preliminary User's Manual

14.2 Standby Function Operation

14.2.1 HALT mode

(1) HALT mode
The HALT mode is set by executing the HALT instruction. HALT mode can be set regardless of whether the CPU
clock before the setting was the high-speed system clock, or internal high-speed oscillation clock.
The operating statuses in the HALT mode are shown below.
412
Downloaded from Elcodis.com electronic components distributor
CHAPTER 14 STANDBY FUNCTION
Preliminary User's Manual U19014EJ1V0UD