Honda CBR650RA Shop Manual page 92

dummyhead dummyhead
MAINTENANCE
SECONDARY AIR SUPPLY SYSTEM
Remove the air cleaner housing (page 7-12).
Check the air supply hoses [1] between the air cleaner
housing, PAIR control solenoid valve [2] and cylinder
head cover for deterioration, damage or loose
connections.
Also, check that the hoses are not kinked or pinched.
If the air supply hose show any signs of heat damage,
inspect the PAIR check valves (page 7-22).
For secondary air supply system inspection (page 7-
19).
EVAPORATIVE EMISSION CONTROL SYSTEM
(Except MA, IIMA, IN, U, IIU models)
Open the fuel fill cap.
Check the breather seal [1] in the fuel fill cap [2] for
deterioration,
necessary.
• Always replace the breather seal with a new one
when the fuel fill cap is removed for service.
Check the hoses between the fuel tank [1], EVAP
canister [2], EVAP purge control solenoid valve [3] for
deterioration, damage or loose connection.
Check the EVAP canister for cracks or other damage.
3-14
cracks or damage. Replace
[1]
[1]
it if
[3]
[2]
[2]
[1]
[2]